Liaoyang Petrochemical Machinery Design and Manufacturing Co., Ltd.
Address: Section 2, South Ring Street, Hongwei District, Liaoyang City, Liaoning Province
Landline: 0419-3666888, 3666338
Email: lyshjx@163.com
Website: www.gxffmt.cn
Anti-corrosion steel pipe refers to a steel pipe that has been treated by anti-corrosion technology and can effectively prevent or slow down the corrosion phenomenon caused by chemical or electrochemical reaction during transportation and use. However, we do not fully understand the anti-corrosion methods and processes of various anti-corrosion steel pipes. For 2PE/3PE anti-corrosion, 2PP/3PP anti-corrosion, fire-proof pipeline buried anti-corrosion, steel-plastic composite pipe anti-corrosion, underground pipeline reinforcement grade anti-corrosion, epoxy coal anti-corrosion Introduction of several major anti-corrosion products such as steel pipe anti-corrosion and pe anti-corrosion steel pipe anti-corrosion.
1, 2PE/3PE anti-corrosion method:
The bottom layer of the three-layer PE is an epoxy coating, the middle layer is a polymer adhesive, and the top layer is a polyolefin. The adhesive may be a modified polyolefin containing a polar group grafted onto the polyolefin carbon bond backbone. In this way, the adhesive can be fused to the surface unmodified polyolefin, and the polar group can be cured with the epoxy resin. This combination is characterized by the optimum bond strength between the three coatings, and the properties and characteristics of the layers allow the three layers of coating to complement each other. It is characterized by high cost and complicated process.
The first layer of epoxy powder (FBE>100um) (epoxy powder >100um refers to more than 100 microns)
The second layer of adhesive (AD) 170 ~ 250um
The third layer of polyethylene (PE) is 2.5 to 3.7 mm. The three materials are integrated and firmly combined with the steel tube to form an excellent anti-corrosion layer.
3PE anti-corrosion layer combines the anti-corrosion performance of the fusion-bonded epoxy powder with the anti-mechanical scratch protection of polyethylene, and solves the sales problem of polyethylene. Due to the poor adhesion of the hot melt adhesive, the stripped polyethylene provides a shielding effect on the cathodic protection. 3PE anti-corrosion layer has high requirements on the surface treatment condition of the pipe, and should reach the anchoring depth of 50μm~75μm. The side will affect the anti-cathode peeling and waterproof penetration ability of the anti-corrosion layer.
Liaoyang Petrochemical Machinery Design & Manufacturing Co., Ltd. All rights reserved. Yingkou Zhongchuang Network Technology Co., Ltd. provides technical support.