The reducer tee is a type of tee, which is a branch pipe and two other tee fittings with different diameters.

As usual, when selecting the size of the three-way three-way specification, what kind of pipe should be known through the drawing, and what kind of pipe is used, it is necessary to appreciate the typical construction and current work history. For example, for the drainage pipe, we will not accept the reducer tee. Even if the branch pipe is smaller than the main pipe, it can only be changed through the process. As for the elbow, the typical requirement is that the pipe of DN100 turns 90°. Bend, only two 45° elbows can be used. In principle, the address commonly used to reduce the size of the three-way tee can also be used in combination with the popular three-way plus variable path, but this is very expensive and there is no need, this time is the most appropriate choice of the use of the three-way. The diameter difference between the three-way and the three-way is like de110, the horizontal branch is de75, and the horizontal branch is de75. This is the reducer. The same path is the same as this. If it is the de110, it is waiting. Therefore, we must manipulate the timing of the different ways according to the actual situation, and we should accept other tees at other moments.